YUKEN A90-F-R-01-C-S-60 Pump

“A” Series Variable Displacement Piston Pumps

1. Whenever setting pressure, make sure the full cut-off pressure never exceeds the maximum intermittent pressure.

2. Care should be taken in cases of use at a higher pressure than the rated pressure, because operating terms may be restricted. For example, if used as per maximum illustrated operating conditions, intermittent time at maximum flow is restricted to under 1/5 of one cycle time and under six seconds simultaneously. Conditions may vary according to the actual working pressure and delivery (inclination angle of the swash plate). Consult the factory or Yuken sales representative for further information.

3. The table above shows specifications for using petroleum-based oils. Pumps (customized design) for special fluids are also available. However, their operating pressure and maximum shaft speed differ from the table above’s values, depending on the fluid type. The range of operating temperatures and viscosities may differ from those of petroleum-based oils due to their characteristics.

 

Model NumbersA90-F-R-01-C-S-60
Geometric Displacement cm /rev (cu. in. /rev)91.0 (5.55)
Minimum Adj. Flow 3 cm /rev (cu. in. /rev)56 (3.42)
Operating Pressure MPa (PSI)Rated25 (3630)
Intermittent28 (4060)
Shaft Speed Ranger/minMax.1800
Min.600
Approx. Mass kg (lbs.)Flange Mtg.72.5 (160)
Foot Mtg.93 (205)

Over the years, we have been committed to the production and research of “A” Series Variable Displacement Piston Pumps. We not only provide high-quality machinery and accessories for sale on the market, but we also care about customers’ profits and the impact of machinery on the environment. If you want to know more details, please contact us immediately!

Yuken A Series Variable Displacement Piston Pumps A90-F-R

Yuken A Series Variable Displacement Piston Pumps A90-F-R-01-C-S-60 for sale, Saar HK Electronic Limited provide Yuken A Series Variable Displacement

A Series Variable Displacement Piston Pumps

Dec 3, 2016 – A90. A100. 2.0. 4.0. 6.0. 10. 12. 36. 56. 62. 7.2. A145. 83. Model. Adjustable volume with each. 32. A56. (56.2 cm3/rev). 32. A70. -F. R. 01. B. S. -60. Series Number. Mounting. Direction of. Output Flow vs. Input Current.

Series Variable Displacement Piston Pumps

and the temperature range is from 0 to 60°C (32 to 140°F),  A90. A145. Adjustable volume with each full turn of the adjustment screw. 3 cm /rev  Numbers. Geometric Displacement. 3 cm /rev (cu.in./rev). Control Type. 01. 02. Output Flow vs