Features
▶ Space-saving construction due to the recessed mounting flange
▶ Easy to install. Simply plug into the mechanical gearbox.
▶ Approved for very high rotational speeds
▶ High starting efficiency
▶ Excellent slow-running characteristics
▶ Wide control range (can be swiveled to zero)
▶ High torque
▶ Optional with flushing and boost-pressure valve mounted
▶ Optional with an integrated or mounted counterbalance valve
▶ Bent-axis design
| Axial piston unit | Bent-axis design, variable, nominal pressure 450 bar, maximum pressure 500 bar |
| Operating mode | Plug-in motor |
| Size (NG) | Geometric displacement |
| Control device | Proportional control, hydraulic positive control ΔpSt = 10 bar ΔpSt = 25 bar negative control ΔpSt = 10 bar ΔpSt = 25 bar Proportional control, electric positive control U = 12 V U = 24 V negative control U = 12 V U = 24 V Two-point control, hydraulic negative control Two-point control, electric negative control U = 12 V U = 24 V U = 12 V U = 24 V Automatic control high-pressure related, positive control with minimum pressure increase Δp ≤ approx. 10 bar with pressure increase Δp = 100 bar with minimum pressure increase Δp ≤ approx. 10 bar |
| Pressure control/override | Without pressure control/override Pressure control fixed setting, only for HP5, HP6, EP5 and EP6 Override of the HA1 and HA2 controls, hydraulic remote-controlled, proportional |
| Connector for solenoids | Without connector (without solenoid, only for hydraulic control) 0 DEUTSCH – molded connector, 2-pin, without suppressor diode |
| Response time damping | Without damping (standard with HP and EP) 0 Damping HP, EP, HP5,6D. and EP5,6D., HZ, EZ, HA with BVD/BVE counterbalance valves 1 One-sided in the inlet to large stroking chamber (HA) |
| Setting range for displacement | Vg max-setting screw Vg min-setting screw No setting screw short (0-adjustable) medium long extra long short (0-adjustable) medium long extra long medium short (0-adjustable) medium long extra long |
| Series | Series 7, index 1 |
| A version of port and fastening threads | Metric, port thread with O-ring seal according to ISO 6149 |
| Direction of rotation | Viewed on the drive shaft, bidirectional |
| Sealing material | FKM (fluoroelastomer) |
| Driveshaft bearing | Standard bearing |
| Mounting flange | ISO 3019-2 160-2 190-2 200-2 260-4 |
| Driveshaft | Splined shaft DIN 5480 W35×2×16×9g W40×2×18×9g W45×2×21×9g W50×2×21×9g |
| Working port | SAE working ports A and B at rear SAE working ports A and B lateral, opposite SAE working ports A and B at bottom only with integrated BVI counterbalance valve4) Port plate with 1-level pressure relief valves for mounting a counterbalance valve5) BVD20 BVD25, BVE25 |
| Valve | Without a valve With BVD/BVE counterbalance valves mounted6) Integrated brake release valve (only with port plate 6) For external piping for internal ducting With flushing and boost-pressure valve mounted flushing on both sides Flushing flow when: Δp = PND ‒ pG = 25 bar and v = 10 mm2/s (PND = low pressure, pG = case pressure) Only possible with port plates 1 and 2 Flushing flow Qv [l/min] 3.5 |
| Speed sensor | Without speed sensor Prepared with DSA speed sensor With DSA speed sensor mounted8) |
| Standard / special version | Standard version 0 Standard version with installation variants, e.g. T ports open and closed contrary to standard Y Special version |
Over the years, we have been committed to producing and researching Variable plug-in motor A6VE Series 71. We not only provide high-quality machinery and accessories for sale on the market, but we also care about customers’ profits and the impact of machinery on the environment. If you want to know more details, please contact us immediately!
A6VE – Variable plug-in motors | Bosch Rexroth USA Variable motor A6VE with an axial tapered piston rotary group of bent-axis design for hydrostatic drives is available for open and closed circuits. It can be used in.
Axial piston variable motor | Bosch Rexroth AG High pressure motor for integration in mechanical gearboxes,Size,28,55,80107160200250,Nominal pressure,400 bar,5800 psi,350 bar,5100 psi,Nominal.
Mobile hydraulics – Bosch Rexroth A6VE series 6x. High-pressure motor for integration in mechanical gearboxes; Size 28 … 250; Nominal pressure up to 400 bar; Maximum pressure up 450 bar.