YUKEN PV2R4-200-F-RAA-4222 Pump

“PV2R” Series Single Vane Pumps These pumps are of high pressure and high performance, which have been developed especially for low noise operation. To comply with a variety of applications including injection moulding machines, PV2R series single pumps provide the output flow of such a wide range as from 5.8 to 237 cm3/rev (.354 to 14.46 cu.in./rev). The intergral driving parts of the pumps are combined into a kit form and available for supply as a cartridge kit. Therefore, the replacement of the driving parts can be done easily. Specifications: Model Numbers PV2R4-200-F-RAA-4222 Geometric Displacement cm3/rev (cu.in./rev) 201  ( 12.27 … Read more

YUKEN PV2R33-116-60-F-RAAA-31 Pump

“PV2R” Series Double Vane Pumps These double pumps consist of two PV2R seires single pumps combined in tandem within a single housing and driven by a common shaft. A Single suction port and two discharge ports are provided so that the output flow can be supplied to separate circuits. Model Numbers PV2R33-116-60-F-RAAA-31 Small Volume Pump Nominal Displacement cm³/rev 116 Large Volume Pump Nominal Displacement cm³/rev 60 Mounting Flange Mtg. Direction of Rotation Clockwise (Normal) Small Volume Pump Discharge Port Position Upwards (Normal) Large Volume Pump Discharge Port Position Upwards (Normal) Suction Port Position Upwards (Normal) Design Number 31 Over the … Read more

YUKEN A56-F-R-01-C-K-32Pump

“A” Series Variable Displacement Piston Pumps 1.Whenever setting pressure, make sure the full cut-off pressure never exceeds the maximum intermittent pressure. 2.Care should be taken in cases of used at a higher pressure than the rated pressure, because operating terms may be restricted. For example, if used as per maximum illustrated operating conditions, intermittent time at maximum flow is restricted to under 1/5 of one cycle time and under six seconds simultaneously. Conditions may vary according to the actual working pressure and delivery (inclination angle of the swash plate). Consult factory or Yuken sales representative for further information. 3.The table … Read more

YUKEN ARL1-8-FR01A-10 Pump

ARL1 Series Piston Pumps, Pressure Compensator Type  Features: Low noise and high reliability based on the long established experience The noise at full cut-off with a pressure of 7 MPa, pump rotational speed of 1500 r/min, and measured distance of 1 m is as low as 55 dB(A) (representative value of ARL1-16).  This series also has a high reliability based on Yuken’s long-time experience of manufacturing piston pumps. Lightweight and compact Compared to the AR Series Variable Displacement Piston Pumps, this series is reduced by 40 % both in mass and volume, realizing a greatly lightweight and compact design. Specifications: … Read more